Sony PCV-90 - Manual (Page 123)

i
other Information
FCC Part 68
This equipment complies with Part 68 of the FCC rules. The ringer
equivalence number (REN) and the FCC registration number are printed
on the modem board. If requested, this information must be supplied to
the telephone company.
The REN is used to determine the quantity of devices which may be
connected to the phone line. Excessive REN's on the telephone line may
result in the devices not ringing in response to an incoming call. In most,
but not all areas, the sum of the REN's should not exceed five (5.0). To be
certain of the number of devices that may be connected to the line, as
determined by the total REN's, contact the telephone company to
determine the maximum REN for the calling area.
This modem uses the USOC RJ-11 telephone jack.
If this equipment causes harm to the telephone network, the telephone
company will, when practical, notify you in advance that temporary
discontinuance of service may be required. If advance notice isn't
practical, the telephone company will notify you as soon as possible.
Also, you will be advised of your right to file a complaint with
the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operations of the
equipment. If this happens, the telephone company will notify you in
advance, in order for you to make the necessary modifications
in order to maintain uninterrupted service.
If trouble is experienced with this modem, for repair or warranty
information, please contact 1-888-4SONY-PC, or write to the Sony
Customer Information Center, One Sony Drive, Park Ridge, NJ 07656.
This equipment cannot be used on telephone-company-provided coin
service. Connection to Party Line Service is subject to state tariffs.
Repair of the modem should be made only by a Sony Service Center or
Sony authorized agent. For the Sony Service Center nearest you, call
1-800-222-SONY (1-800-222-7669).
116