Sony PCV-90 User Manual
Page 67
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Introducing the Sony A/V Suite
Other AudioView Functions—Edit and Transforms Menus
Procedure
Open the Edit menu and select Insert Silence.
Open the Edit menu and select Load File into
Clipboard.
Open the Edit menu and select Save
Clipboard, and then specify the file name.
Copy or cut a segment, select a segment in
the file you want to mix, and then open the
Edit menu and select Mix Paste.
Open the Transforms menu and select
Find Peak.
Open the Transforms menu and select
Invert Samples.
Open the Transforms menu and select
DC Offset.
Action
Insert silence (dead or flat spot)
Copy a file to the Clipboard
Save contents of the Clipboard
to a file
Combine (mix) two sounds by
copying one sound
mvr
the other
Locate and display the highest
volume level (amplitude) within
a selected segment
Change positive amplitude
values to negative, and vice versa
Center the display for a sound
recorded with an offset or adjust
the offsets of a file after cutting
and pasting data from different
files
Paste a selected segment
backwards
Fade out the current file, fade in
the data currently in the Clipboard,
and then combine the sounds
Reduce a sound's sample rate by
50 percent
Convert a 16-bit file to 8-bit
format
Change a stereo file into a
mono file
Convert an 8-bit PCM WAV file
to Sound Blaster® VOC format
Convert a VOC file to 8-bit PCM
WAV format
Change the sample rate
Note
^
For additional information about how to use these functions, see the online help.
Open the Transforms menu and select
Reverse.
Open the Transforms menu and select
Crossfade.
Open the Transforms menu and select
Halve Sample Rate.
Open the Transforms menu and select
16
8 Bits.
Open the Transforms menu and select
Stereo
-*■
Mono.
Open the Transforms menu and select
WAV VOC.
Open the Transforms menu and select
VOC - WAV.
Open the Tranforms menu and select
Change Speed.
60