Sony DVP-FX810 - Manual (Page 20)

Identification of Controls (continued)
CTCD_PaneT>
Features of Revolving LCD panel
You can revolve the LCD panel of this player
clockwise a maximum of 180° for use. You can
also operate the player after revolving the LCD
panel 180° and folding it back down.
Revolving the LCD panel
1. Place the unit on a stable and even surface such
as on a table.
2. Push the LCD panel up using your thumbs and
then iift it into a vertical position. ( Refer to
Picture 1.)
3. Revolve the LCD panel clockwise slowly 180°
until it clicks. ( Refer to Picture 2.)
TIPS:
• Do not revolve the LCD panel if it is not fully opened,
as it may become scratched.
• Do not revolve the LCD panel more than 180°or
In the opposite direction as shown below. Doing so
may damage the LCD panel.
Picture 1 Picture 2 Picture 3
Folding the LCD panel after revolving it
Press the LCD panel down to the top of the unit after
revolving it clockwise 180°. In this position, the panel
faces upword. ( Refer to Picture 3.)
Revolving the LCD panel to its original position
1. Open the LCD panel to a vertical position.
2. Revolve the LCD panel counterclockwise slowly 180°
until It clicks.
TIPS:
• When finished using the player, return the LCD panel to
Its original position.
• Do not leave the LCD panel In the face-up position, or
sudden shocks may damage it.
20