Setting up the player – Sony DVP-FX810 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting up the Player
LINE OUT
TO AUDIO I N / O U T
swItcM^h^io^r^od^
TO VIDEO I N / O U T
Audio / Video cable (supplied)
TV or monitor with
audio/video Inputs
LINE IN
switch to the “IN” mode
Audio / Video cable (supplied)
Camcorder or DVD Player
with audio / video outputs
NOTES:
• Refer to the owner’s manual of your TV as well.
• Before you connect the player to your TV be sure to turn off the power and unplug both units from
the wall outlet.
• Connect the player to your TV directly. If you connect the player to a VCR, the playback picture
will be distorted because DVD video discs are copy-protected.
• Be sure to slide the LINE SELECT IN/OUT switch to OUT, or the player may not work.
Switch between LiNE SELECT iN and LiNE SELECT OUT.
LINE SELECT IN: Receive an Input signal from an external source.
“ Line In ” appears on the LCD screen until a signal is received.
LINE SELECT OUT: Send a signal from the unit to the TV.
At this time, the player Is In normal playback mode.
44