Sony KV-27TS20 - Manual (Page 11)

! «ir 1111L* ■ 11 L«i V
Commander
Connecting an Audio. System
—To monitor the TV or connected VCR sound through an
audio system
VIDEO INPUT i
VIDEO
L (MONOI
AUDIO
AUDIO
OUTPUT
(VARIABLE)
to AUDIO OUTPUT
(VARIABLE)
Rear of TV
Connecting cord RK-C74/150
(optional)
Amplifier
To adjust the sound level
Keep the amplifier volume, bass and treble controls to
certain positions (usually at the medium position) and
adjust the level with the VOLUME buttons on the TV or the
VOL buttons on the Commander.
Battery installation
1 Slide the cover all the way so that the battery
compartment appears, then take it off.
2 Place batteries in the Commander with correct polarity
as illustrated inside the case.
3 Replace the cover.
When an audio system is connected to AUDIO OUTPUT, be
sure to set the SPEAKER switch on the TV to OFF.
The sound from the TV’s speakers will be cut off.
In normal operation, batteries will last up to half a year.
If the unit does not operate properly, the batteries might be
exhausted. Replace them with new ones.
To avoid damage from possible battery leakage, remove the
batteries when the Commander will not be used for a long
time.
If a Remote Commander that is not recommended is used to
operate this TV. or if the supplied Remote Commander is
used to operate another T'V. the TV may not operate
properly.
11