Sony KV-27TS20 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
When you connect both VHF and UHF antennas
Use the optional EAC-66 U/V mixer.
1
Prepare the VHF antenna end using the appropriate
connector.
2 Connect the cables to the mixer.
3 Plug the mixer to VHF/UHF.
UHF
VHF
When the U/V mixer is used
Snow and noise may appear in the pictures of the cable TV
channels over 37 (Wh 1).
If the supplied antenna connector has a slot as illustrated
below:
The antenna connector can be used as a U/V mixer.
When connecting both 75-ohm VHF and 300-ohm UHF
antennas, or 300-ohm UHF antenna only:
To turn the slot,
i
.
jso
u
com
or a
similar
ob|Oci
9
Advertising