How to set the internal clock, How to set the channel block – Sony KV-27TS20 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Set the Internal Clock
How to Set the Channel BLOCK
Example: To set the clock to 8:05 PM
1 Press TIMER/BLOCK once
to change from “normal
page” to “clock page.”
2 Press 0, 8, 0, 5, AM/PM (0
necessary).
3 If you have performed the
operation correctly, press
ENTER.
The numbers will “wink”
to indicate that the clock
has been set. (The 0 in
front will disappear.)
8 05
pm
If you have made a mistake, press CLEAR and return to
step 2.
The “AM/PM” indication will disappear after 2 seconds.
To summon ‘TIMER page,” press TIMER/BLOCK before
the “AM”/“PM” indication disappears.
To return to “normal page,” press TIMER/BLOCK after
the “AM’7“PM” indication has disappeared.
Make sure that the clock has been set correctly before
setting the channel BLOCK.
Example: To set the BLOCK for a program which begins
at 9:30 AM on channel 8
1 Press TiMER/BLOCK three
times to change from
“normal page” to “BLOCK
page.”
(CH BLOCK)
■ ■ ■■
pm
CH. ■■■
8: 05
pm
“BLOCK page”
(indications in red)
(CH BLOCK)
9 30OM CH. 8
Press 0, 9, 3, 0. ENTER (0
necessary).
Numbers will “wink“ to
indicate that the time has
been set.
Press 8, ENTER (0 not
necessary).
Numbers will “wink” to
indicate that the channel
has been set.
The BLOCK has now been set.
If you have made a mistake, press CLEAR and return to
step 2.
At the preset time, the picture of the selected channel will
be blocked from view and the sound will be muted. A red
“BLOCKED” indication will appear on the screen while the
channel is blocked.
Normal reception will be resumed after 12 hours.
To reset the clock, summon “clock page” and press CLEAR
before the “AM’7“PM” indication disappears. Then follow the
steps above from step 2.
12:00 AM stands for midnight.
12:00 PM stands for noon.
To return to normal reception while the channel is blocked,
recall “BLOCK page” and press CLEAR.
The BLOCK setting blocks a specified channel for the same
12-hour period everyday.
To clear BLOCK setting, summon “BLOCK page” and press
CLEAR.
To reset, clear the setting and follow the steps above from step
2
.
17