Connecting tv antenna/cabie – Sony KV-27TS20 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting TV Antenna/Cabie
If you cannot obtain satisfactory reception with an indoor
antenna, use an outdoor antenna.
Cable TV reception is only possible by connecting a cable
supplied by your local cable operator.
To Connect a VHP, UHF, or VHF/UHF Combination Antenna* or CATV Cabie
1
Check the cable type and prepare the cable end using
the appropriate connector.
Plug the connector into VHF/UHF on the rear of the
TV.
75-ohm coaxial cable (round)
Attach an optional
F-type connector.
300-ohm twin-lead cabie (flat)
Fasten with a
screwdriver.
VHFiUHF
t Most combination antennas are eauippcd v.'itn a signal srilitter Remove
the splitter and attach the appropriate connector.
How to attach an F-type connector to the 75-ohm coaxial cable
1
2
3
4
7 mm (I/--*, inch) 10 mm (n.'s inch) F-type connector
3 mm
C'/f,
inch)
8