Timer/block, Available functions, Timer/biock – Sony KV-27TS20 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Timer/Block
Available functions
Internal clock
Once the internal clock is set, the current time will appear on the screen.
It is necessary to set the clock correctly to activate the program start TIMER and channel
BLOCK.
Program start TIMER
Makes a program of your choice appear on the screen automatically at the desired time.
Channel BLOCK | Blocks a channel from appearing on the screen for 12 hours.
I Use channel BLOCK to prevent children from watching undesirable programs.
The buttons used for the above functions are located on the Remote Commander.
To set the internal clock, program start TIMER and
channel BLOCK, you must summon the corresponding
“pages": “clock page,” “TIMER page” and “BLOCK
page.”
To change the “pages,” press TIMER/BLOCK.
T/B stands for the TIMER/BLOCK button.
T/B
'BLOCK page’'
(indications in red)
“AM'T'PM "
indication
disappears
Ç “TIMER page" ^
All settings will be erased from the unit's memory if the unit
is unplugged, or if a power failure occurs.
The TIMER and BLOCK will operate only If the clock Is set
correctly.
If the TIMER and BLOCK are set for overlapping times on
the same channel, the blocked channel will appear on the
screen at the time set on the TIMER.
16