Sony CPD-220GS - Manual (Page 12)

Customizing Your Monitor
3 Press the buttons to select the color
temperature.
There are two color temperature modes in the OSD.
The preset adjustments are 9,300K and 5,000K.
Selecting your own color temperature between
9.300K and 5.000K
Press the / 1 buttons to select " g] (VARIABLE)"
and adjust by pressing the ^ buttons.
■♦•... for a higher temperature (bluish)
•^ ... for a lower temperature (reddish)
The OSD automatically disappears after about 30 seconds.
To close the OSD, press the MENU button again.
To reset, press the RESET button while the OSD is on. The
selected color temperature is reset to the factory settings.
Using the SCREEN On-screen
Display
Adjust convergence settings to eliminate red or blue
shadows that may appear around objects on the screen.
Adjust the CANCEL MOIRE function to eliminate wavy or
elliptical lines that may appear on the screen.
Once the setting is adjusted, it will be stored in memory for
all input signals received.
1 Press the MENU button.
The MENU OSD appears.
2 Press the and /-♦ buttons to select
- (UD SCREEN,” and press the MENU button again.
The SCREEN OSD appears.
3 Press the buttons to select the item you want
to adjust.
Select To
H CONVERGENCE
adjust the hqrizontal convergence
CD adjust the vertical convergence
V CONVERGENCE
lol eliminate elliptical or wavy lines on
CANCEL MOIRE the screen
•JOB- * adjust the degree of moire
MOIRE ADJUST cancellation
‘ CANCEL MOIRE must be "ON" for " HB- (MOIRE ADJUST)"
to appear on the screen.
(continued)
12