Sony CPD-220GS - Manual (Page 15)

Customizing Your Monitor
English, French, German, Spanish, Italian and Japanese
versions of the OSDs are available.
1 Press the MENU button. ^
The MENU OSD appears.
2 Press the and buttons to select
" S OPTION," and press the MENU button again.
The OPTION OSD appears.
MANUAL DEGAUSS
3 Press the buttons to select" Q (LANGUAGE)".
4 Press the buttons to select the desired
language.
ENG: English, FRA: French, DEU: German,
ESP: Spanish, TTA: Italian or JPN: Japanese.
The OPTION OSD automatically disappears after about 30
seconds.
To close the OSD, press the MENU button again.
To reset to English, press the RESET button while the OSD
is on.
Resetting the Adjustments
1 Press the MENU, •D’f/'t' and 3^"/"^buttons to select
the OSD containing the item you want to reset.
2 Press the buttons to select the item you want
to reset.
3 Press the RESET button.
RESET
Press and hold the RESET button for more than two
seconds.
All of the adjustment data, including the brightness and
contrast, is reset to the factory settings.
RESET
m
When there is no OSD displayed, press the RESET
button.
AU of the adjustment data for the current input signal is
reset to the factory settings.
Note that adjustment data not affected by changes in input
signal (OSD language, OSD position and the control lock
function) is not reset to the factory settings.
RESET
15