Hookup 3, Antenna hookup, Q use this hookup if you're using – Sony SLV-688HF User Manual
Page 16: Rear of tv vhf/uhf, Rear of tv
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 3: Hookups (continued)
Hookup 3
Pages 16
Antenna hookup
Make the following connections if you're using an antenna (if you don
have cable TV).
Q Use this hookup if you're using:
• VHF/UHF antenna (you get channels 2-13 and channels 14 and higl
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
VCR
gg—» - -
or
Rear of TV
VHF/UHF
—@A Match the ty
connector on
VHF TV: A, B, or C
B
UHF
VHF
-4y
UHF
[0 Use this hookup if you're using a VHF-only antenna (you get
channels 2-13 only)
VCR
or
Rear of TV
VHF/UHF Match the tyi
—e A connector on
TV: A, B, or C
VHF
B For connectoi
UHF
VHF
B and C, no U
connection is
required.
UHF
If you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so that you can connect the cable to the VHF /
IN connector. If you have separate cables for VHF and UHF antennas, you shot
a U/V band mixer (not supplied). For details, see page 70.
16 I Getting Started