Symptom, Remedy – Sony SLV-688HF User Manual

Page 72

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Troubleshooting (continued)

Ç

О

Symptom

A TV progi'iim docs not appear

on the TV screen.

TV reception is poor.

The tape starts plaving as soon
as it is inserted.

Remedy

• Make sure the TV is set to the channel tor the VCR.

YOU are using a monitor, set it to \’ideo input.

• Adjust the TV antenna.

• The safety tab has been removed. To record on this

tape, cover the tab hole.

The tape ejects when vou press
• REC.

Nothing happens when vou
press

Ф

REC.

• Check that the safety tab has not been removed.

• Make sure the tape is not at its end.
• Select the correct source. Select a channel number with

the Cfi +/- buttons when recording TV programs;
select "LI" or "L2" with the INPUT SEI.FCT button
when recording from other equipiuent.

The timer does not operate.

Oi

c

‘ " Б

о

Ф
Ф

E

i-

A tape cannot be inserted.

The remote commander does
not function.

^ The tracking meter docs not
O appear on the screen.

You cannot control other TVs.

The VCR needs to be cleaned.

Check that the clock is set.
Make sure a tape has been inserted.
Check that the safety tab has not been removed.
Make sure the tape is not at its end.
Make sure a program has been set for timer recording.
Make sure your timer settings have not already passed
the current time.
Check that the cable box is turned on.
The clock stops if the VCR is disconnected from the
wall outlet for more than one hour. Reset the clock and
timer.

Check that a tape isn't already in the tape
compartment.

Make sure you are pointing the remote commander at
the remote sensor on the VCR.
Replace all the batteries in the remote commander with
new ones if they are weak.
Make sure the [TV /1 VIDEO] remote control switch is
set correctly.

The recording condition of the tape is very poor and
tracking cannot be adjusteef.

Set your TV's code number. The code number resets to
01 when you replace the batteries of the remote
commander.

Clean the cabinet, panel and controls with a dry, soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine.

72 Additional Information

Advertising