Sony SLV-688HF - Manual (Page 53)

To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press POWER. The ©
indicator turns off and the VCR switches on. Remember to press POWER to
reset the VCR in timer recording standby after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV program.
To lock the VCR after setting the timer (Child Lock)
While the VCR turns on, hold POWER down on the VCR until "LOC" and
the 0-" indicator appear in the display window. The VCR turns off and the
o-n indicator remains lit. The VCR will not work except for timer recording.
To unlock the VCR, hold POWER down on the VCR until the o-n indicator
disappears from the display window. The VCR is unlocked and turns on.
To stop timer recording while the VCR is locked, press ■ STOP. The
recording stops and the VCR is unlocked.
Tip
• To cancel the procedure, press VCR Pius+ before pressing SET.
Note
• If the VCR doesn't accept the PlusCode, this means that:
- The PlusCode is incorrect.
- ONCE, DAILY or WEEKLY was selected incorrectly. You cannot select DAILY or
WEEKLY for a program that airs more than seven days ahead.
00
OJ
w
O
■ n
ID
O
3
Basic Operations 53