Sony SLV-688HF - Manual (Page 8)

Step 3: Hookups (continued)
Audio/video (A/V) hookup Pages 8 and 9
If your TV has audio / video (A / V) input jacks, you wdll get a better picture
and sound when you hook up your VCR using these connections. In
addition, for a true "home theater" experience, you should connect the
audio outputs of your VCR or TV to your stereo system. If your TV doesn't
have A/V inputs, see the following pages for antenna or cable hookups.
If you're not planning to use your VCR to record programs, you're finished
setting up the VCR after you've made the connections shown on pages 8 am.
9.
If you want to record off-air or off your cable TV system, complete these
connections first, and then go to the following pages for antenna or cable
hookups.
0
Use this hookup if your TV has stereo jacks
VCR stereo receiver
Audio/video cable (supplied)
m Use this hookup if your TV doesn't have stereo jacks
VCR stereo receiver
Video cable (not supplied) Audio cable (not supplied)
Note
To play a tape in stereo, you must use the A/V connection.
8 Getting Started