Ettinq the beep switch, Notes, Sefting the beep switch – Sony CCD-FX410 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
ettinq the BEEP Switch
This beep sound is to help you cofirm when you start and stop recording.
When BEEP is set to ON, it will beep once when you start recording and beep twice when
you stop recording.
It will also beep several times as a warning of any unusual conditions of the camcorder.
If you want to deactivate the beep, set BEEP to OFF.
?V„
1 )
/
--------
BEEP
CD#
■f
1
3
ff
| |
on
j
Notes
• If the battery has been installed, remove it.
Reattach the battery after setting the BEEP ON/OFF switch.
• Beep will not be recorded on the tape.
• For warning beep, see page 72.
"I 2 Getting Started
Advertising