Sony CCD-FX410 - Manual (Page 54)

How to edit
Insert a tape to be recorded into recording VCR.
Slide EDIT on the camcorder to the direction of the arrow.
Set POWER of the camcorder to VTR, then insert the recorded tape.
4
Play back a tape on the camcorder until you locate the point where you
want to start editing, then set the camcorder to the playback pause
mode.
On the recording VCR, locate the recording starting point and set the
VCR to the recording pause mode.
G
Press II PAUSE of the camcorder and VCR simultaneously to start
editing.
To edit more scenes
Repeat steps 4 to 6.
To stop editing momentarily
Press II on the recording VCR.
To stop editing
Press □ on both VCRs.
If you use the DATA SCREEN function
The indicators displayed on the TV screen will also be recorded.
Use of the EDIT switch
When you set EDIT to the direction of the arrow (EDIT ON), you can keep picture and
sound deteriorations resulting from editing to the minimum. Avoid using the edited tape for
multiple generations of editing. After editing, be sure to set this switch in the opposite
direction of the arrow (EDIT OFF).
54
Advanced Camera Operation