Turn standby up, Press start/stop (red button) once, Automatic recording – Sony CCD-FX410 User Manual
Page 18: To stop recording momentarily, When you have finished recording, Ejecting the tape, Caution
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
How to Record
I
Turn STANDBY up.
“STBY" appears in the viewfinder. Now,
you can see through the viewfinder.
Press START/STOP (red button)
once.
The camera is recording when the word
“REG” appears on the viewfinder screen
and the red iamp iights in the viewfinder.
You can aiso confirm fhe start of recording
with beep sound when you have the BEEP
switch turned on.
^
1
'
red lamp
in the viewfinder you can see a black and white picture of what you are recording and
information that indicates what the camcorder is now doing.
Automatic recording
With PROGRAM AE set to the green position and FOCUS set to AUTO, aii the camera
functions are on automatic (i.e. auto iris, auto white balance, auto focus) and the shutter
speed is set at normai (1/60 second.)
To stop recording momentarily
Press START/STOP again. "STBY" appears in the viewfinder. It beeps twice when you
have BEEP turned on.
When you have finished recording
Turn STANDBY down and slide POWER to OFF.
Ejecting the tape
Make sure that you have attached the battery pack or other power source to the
camcorder.
1 Press the small blue button on EJECT, and at the same time push EJECT in the
direction of the arrow.
2 Take out the tape.
3 Press the PUSFI mark on the cassette holder to close it.
Caution!
Please remember that you can only use 8-mm format video tapes with this camcorder,
and that it is not possible to use PCM recording/playback available on some 8 mm
recorders. The PCM sound recorded or after-recorded with other recorder cannot be
played back with this camcorder.
You will be able to record tapes in SP (standard play) mode only and play back tapes
in both SP and LP (long play) modes.
■j
Q
Basic Camera Operation