Inserting a tape, Preventing accidental erasure, Note on handing tapes – Sony CCD-FX410 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Inserting a Tape
Make sure that the battery pack or other power source is attached
1
Press the small blue button
on EJECT and
simultaneously push EJECT
in the direction of the arrow.
The cassette compartment
automatically lifts up and opens
toward you.
Insert a tape with the window
facing outside.
Close the cassette holder by
pressing the area marked
“PUSH”.
Preventing Accidental Erasure
Slide the tab on the cassette to expose the red mark. This will prevent accidental
recording.
To re-record on this tape, slide the tab opening the window.
If you try to record with the red mark exposed, the and ± indicators blink in the
viewfinder and you will hear beep sound for about five seconds.
r )
-<<
t
:
Bt-J
Note on handing tapes
Never insert anything in the small holes on the rear of the cassette. These holes are used
to sense the type and thickness of tape, or if the red mark is exposed or covered, etc.
Store tapes in their cases and keep them in an upright position to prevent intrusion of dust
and uneven winding.
Getting Started Q