Connecting your syste – Sony INT-W200 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Connecting Your Syste
I
Connect the coaxial cable from your TV antenna or cable TV to the
VHF/UHF IN jack on the Internet Terminal.
I
Connect the supplied coaxial cable to the VHF/UHF OUT jack on
your Internet Terminal and to the VHF/UHF IN jack on your TV.
5 Connect one end of the telephone line cable to the Internet Terminal's
TEL LINE jack. Connect the other end to your home's telephone
outlet.
I- Connect one end of the AC power cord to the Internet Terminal's AC
IN jack. Connect the other end to an AC outlet.
^ If you choose this setup, set the CH3-CH4 switch on the back panel of the Internet Terminal
to the channel for which there is no broadcaster in your area. Then tune the TV to the same
channel using your remote control to view WebTV.
^ An adapter may be required if the jacks on your TV do not look like those illustrated. See
your TV's owners manual for more information.