Sony INT-W200 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Your System
1
Connect your TV to the Internet Terminal as explained in one of the
connection options on pages 8 through 14.
2
Connect the coaxial cable from your TV antenna or cable TV to the
VHF/UHF IN jack on your VCR.
3
Connect a coaxial cable (not supplied) from the VHF/UHF OUT jack
on your VCR to the VHF/UHF IN jack on the Internet Terminal.
4
To view the WebTV Plus Network, press the TV /VIDEO button to
cycle through the TV's video inputs until the WebTV input appears
on your screen. To watch video programs from your VCR, turn off the
Internet Terminal and tune your TV to channel 3 or 4 (as set on the
rear of your VCR).
^ If your TV has additional A/V Inputs, you may connect /W cables (not supplied) from the AA/
OUT jacks on your VCR to the AA/ IN jacks on your TV ^‘en use your remote control to cycle
through the inputs imtil you reach the VCR's input.
17