Press ^ or p to get a clearer picture, Press execute, Fliw-tthrirg – Sony SLV-373UC User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fliw-ttHriRg
Normally the AFT (Auto Fine Tuning) setting is set to ON
and the AFT function fine-tunes the picture. If the picture
of a particular channel is not acceptable, fine-tune
manually.
Operation
Call up the TUNER PRESET display referring to
steps 1 to 3 in “To Preset Desired Channels
Automatically.”
Press A or ▼ to move
the cursor to FINE
TUNING.
The tine tuning indicator
will appear.
TUNER PRESET
2CH
NC«MAUCATV«NORM
CATV
AUTO PF^SET
MANIMLSET
«ADD
ERASE
AFT
»ON OFF
► FINE TUNING »
»
«
Press ^ or P to get a
clearer picture.
The AFT ON/OFF will
automatically be
switched to OFF.
TUNER PRESET
2CH
NORMAUCATV«NORM CATV
iMiTO PRESET
MANUAL SET «ADO ERASE
AFT
ON »OFF
► FINE TUNING «
«
Press
A
to move the
cursor to AFT and
select ON if you
cannot get a better
picture.
TUNER »I^ET
2CM
NOR««UC*TVT*l!»!M
CATV
AUTO.PRESET
MANUAL SET «ADD ERASE
► AFT
«ON OFF
FINE TUNING
Press EXECUTE.
About the FINE TUNING indicator
The FINE TUNING indicator shows the operable fine-
tuning range. When the VCR’s tuner is receiving a
broadcast signal in the best condition, the indicator will
be at the center position or within one space right or left
of the center position. However, even when a broadcast
is received in the best condition, there may be cases
when the indicator will not be at the position explained
above.
26