Sony SLV-373UC - Manual (Page 6)

Identifying the Operational Parts
Refer to the pages indicated for detaiis.
00
0 0 00 0 0
pT] POWER ON/OFF switch and indicator
Press to turn on and off the power of the unit. The
indicator lights when power is supplied,
A eject button
Press to eject the cassette.
[y| Cassette compartment
[4] Display window and function mode display
Various displays appear. See “Indications in the
Display Window.” (page 57)
■ STOP button
Press to stop the tape.
M/PM PAUSE/STILL button (page 33)
In the playback mode: Press to obtain a still picture.
In the recording mode: Press to pause recording
temporarily.
0 > PLAY button
Press to playback the tape.
DUAL MODE SHUTTLE ring (page 33)
In the stop
mode
Turn to the right (►►) to advance
the tape rapidly, and to the left
(■44) to rewind the tape.
In the playback
mode Turn to the right (FORWARD) to
advance and to the left
(REVERSE) to reverse the picture
in various speeds including a still
picture when the ring is released.
In the fast-
forward mode
Turn to the right (FORWARD) to
view the picture in fast speed.
The unit will return to fast-forward
when the ring is released.
In the rewind
mode Turn to the left (REVERSE) to
view the picture in fast speed
reverse. The unit will return to
rewind mode when the ring is
released.
COMMAND MODE selector (page 9)
To remotely control this VCR with the supplied
wireless Commander, set this selector to the same
position as that on the Commander. Usually set to
VTR 3.
SHARPNESS SOFT/SHARP control (page 35)
Use to adjust the sharpness of the picture if
necessary. Normally set this control at the center
position.
LINE IN 2 VIDEO and AUDIO jacks (phono type)
(page 54)
Connect to the video/audio output jacks of another
VCR or a video camera recorder,
|f^ Remote sensor
Point the supplied Commander here.