Editing with a vcr with a control s out terminal – Sony SLV-373UC User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing with a VCR with a Control S Out Terminal
Using this VCT m the PlayNffik VOI and Ai^her VOT wKh a GeiM S OUT Tdimlmd mi
the Synchro Edit Function as the Recording VCR
Playtack VCR
H Turn on the power of the recording VCR and
’ Insert a tape for recording.
2 Insert a source tape into the playback VCR.
O Activate the EDIT mode on the playback VCR.
Activate the EDIT mode on the
recording
VCR if the
recorder has this function.
^ Search for the edit start point and enter the
^ recording pause mode.
C Search for the playback start point and enter the
'' playback pause mode.
g Press SYNCHRO EDIT on the recording VCR.
Both recording and playback will start.
7 At the desired edit end point, press SYNCHRO
' EDIT on the recording VCR.
The recording VCR will enter the recording pause
mode and the playback VCR will enter the playback
pause mode.
To edit the next scene
Repeat steps 5, 6, and 7.
When editing Is completed
Press STOP on both of the units.
When the recording VCR is a stereo unit
Make connections with the VMC-910MS/920MS cable (not
supplied).
When connecting the VCRs
Do not connect both LINE IN and LINE OUT jacks on the
two VCRs simultaneously. Doing so may cause a humming
noise.
Signal flow
56