Index function, To mark imtex si^wii, Automatic index mark – Sony SLV-373UC User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Index Function
A particular program cart be easily located by an index
signal marked on the tape.
To Mark Imtex Si^wii
Display window
iND&c
mm
The INDEX indicator blinking in the display window and
the INDEX MARK display on the TV screen show that an
index signal has been marked.
Automatic index mark
An index signal is automatically marked at the beginning
of recording.
Manual index mark
Index signals can be marked at any desired point during
any recording or normal playback. Press INDEX MARK to
mark an index signal.
Notes
•Leave an interval of more than 2 minutes between index
signals when marking them one after the other so that the
VCR can detect them correctly.
• While an index signal is being marked during playback, the
recorded sound will not be heard, but it will not be erased.
• You cannot mark an index signal in the following cases:
— On a tape without its safety tab.
— On an unrecorded portion of a tape.
— Immediately before a point on the tape where the tape
speed (EP or SP) changes.
— When playing back a tape recorded in LP mode.
50