Sending e-mail – Sony PCV-130 User Manual
Page 129
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Messages
Sending E-Mail
If you used the Communication Center Setup Wizard to configure the
Communication Center for e-mail, the Send command connects you to
your service provider. Incoming e-mail is then delivered to the New
folder, and outgoing mail is delivered from the Outbox.
If you do not want the Communication Center to connect automatically
to your service provider, clear the “ Deliver outgoing messages
immediately" checkbox on the E-Mail tab of the Options dialog.
If you did not select to use the Communication Center to send and receive
e-mail during set up, you need to enable e-mail. Select Configure from the
main menu and run the Setup Wizard. The Setup Wizard guides you
through the steps of setting up e-mail in the Communication Center and
correctly configures Microsoft® Exchange/Windows Messaging.
To Enable E-Mail
1
Click the MENU button on the Main screen and .select Options...
The Options dialog is displayed.
2
Select the E Mail tab.
The E-Mail options dialog is displayed.
3
Change the option from “Do not log on to Microsoft Exchange/
Windows Messaging.”
You are prompted to restart the Communication Center for your
changes to take effect.
4
Click Yes.
The Communication Center is restarted with e-mail enabled.
125