Sony PCV-130 User Manual
Page 173
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Adding Memory
7
Align the DIMM over the socket.
! To avoid damaging the DIMM socket, move the DIMM socket tabs slightly
outward to relieve pressure. The DIMM should tiien click easily into place
8
Firmly insert the bottom edge of the DIMM into the socket.
9
Pre.ss evenly against the DIMM’s upper corners. The end latches snap
into position automatically.
10
Reinstall any add-in cards or components you removed.
11 Replace the side and rear panel as described on page 172.
169
Advertising
This manual is related to the following products: