Sony PCV-130 User Manual
Page 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Other AudioView Functions—Edit and Transforms Menus
Action
Procedure
Insert silence (dead or fiat spot)
Open the Edit menu and select Insert Silence.
Copy a file to the Clipboard
Open the Edit menu and select Load File into
Clipboard.
Save contents of the Clipboard
Open the Edit menu and select Save
to a file
Clipboard, and then specify the file name.
Combine (mix) two sounds by
copying one sound
over
the
other
Copy or cut a segment, select a segment in
the file you want to mix, and then open the
Edit menu and select Mix Paste.
Locate and display the highest
volume level (amplitude)
within a selected segment
Open the Transforms menu and select
Find Peak.
Change positive amplitude
values to negative, and vice
Open the Transforms menu and select
Invert Samples.
versa
Center the display for a sound
recorded with an offset or
adjust the offsets of a file after
cutting and pasting data from
different files
Open the Transforms menu and select
DC Offset.
Paste a selected segment
backwards
Open the Transforms menu and select
Reverse.
Fade out the current file, fade in
the data currently in the
Clipboard, and then combine
the sounds
Open the Transforms menu and select
Crossfade.
Reduce a sound’s sample rate
by 50 percent
Convert a 16-bit file to 8-bit
format
Change a stereo file into a
mono file
Convert an 8-bit F'CM WAV file
to Sound Blaster® VOC format
Convert a yoc file to 8-bit
PCM WAV format
Change the sample rate
Open the Transforms menu and select
Halve Sample Rate.
Open the Transforms menu and select
16 -► 8 Bits.
Open the Transforms menu and select
Stereo Mono.
Open the Transforms menu and select
WAV ^ VOC.
Open the Transforms menu and select
VOC WAV.
Open the 'Tranforms menu ancl select
Change Speed.
For additional information about how to use these functions, see the online help.
68