Connecting the tv antenna/cable – Sony KV-27XBR65 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting the TV Antenna/Cable
Either an indoor antenna or outdoor antenna can be
connected. For better quaiity picture, connecting an
outdoor antenna is recommended.
Cable TV reception is only possible by connecting a
cable supplied by your local cable company.
To Connect a VHF, UHF, or VHF/UHF Combination Antenna* or CATV Cable
Check the cable type and prepare the cable
end using the appropriate connector.
7&ohm coaxial cable (round)
Attach an optional Ftype oonnector.
1
2
3
4
7 mm (’/4 Inch) 10 mm (®/8 inch)
F-type connector
3 mm (’/8 inch)
SOO-ohm twinlead cable
Attach the supplied antenna connector.
1
Loosen with a
screwdriver.
Attach the
cable and
fasten with a
screwdriver.
Plug the connector Into VHFAJHF on the
rear of the TV.
75-ohm coaxial cable ^nd)
VHF/UHF
300-ohm twin-lead cable (flat)
VHF/UHF
» Most combination antennas are equipped with a signal
splitter. Remove the splitter and attach the appropriate
connector.
For a better quality picture, it is recommended to use the
optional cable so that the 300 ohm twin-lead cable can be
kept at a distance from the TV set.
10