H|cd – Sony KV-27XBR65 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When you connect both VHP and UHF antennas
Use the optional EAC66 U/V mixer.
1
Prepare the VHP antenna end using the
appropriate connector.
2
Connect the cables to the mixer.
3
Plug the mixer to VHP/UHP.
When you connect a cable with a special
converter/deccder* for pay cable TV systems
Pay cable TV systems use scrambled or encoded
signals and require special converters (decoders) in
addition to the normal cable connection.
H|CD=
AUX
<3D^
TO
CONVERTER
Optional
75-ohm
coaxial cable
Converter/
decoder
VHF/UHF
CATV
cable
When you connect both VHP/UHP antennas and a
CATV cable
AUX
TO
>NVEF
VHF/UHF
CATV
cable
TO
CONVERTER
Note
VHF/UHF
antenna cable
In this case, do not connect anything to the TO
CONVERTER terminal.
When the U/V mixer is used
Snow and noise may appear in the pictures
of the
cable TV
channels over 37 (W-f 1).
«The special converter/decoder will be supplied by the cable
company.