Presetting tv channels – Sony KV-27XBR65 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Presetting TV Channels
To Preset All Receivable Channels Automatically
1
Press POWER on the TV or the Remote
Commander to tum the TV on.
POWER
2
Press CABLE so that the
appropriate mode appears.
CABLE
£ 3
, C3
t
1
To preset VHP or UHF
channels
To preset cable TV
channels
Press ANT/AUX according to the channel to be preset
1
3
AUX 3
ANT/AUX
To preset VHF, UHF
To preset pay cable
or regular cable
TV channels
TV channels
4
Press AUTO PGM.
AUTO PGM
“AUTO PROGRAM” is displayed on the screen and receivable
channels (other than the channels already preset) will be
preset in numerical sequence. The channels previously preset
remain in the unit’s memory.
When no more channels can be found, the programming stops
and the lowest numbered channel is displa^.
Receivable channels of this TV are:
VHP: 2-13
UHF: 14^
Cable: 1-125
To add the channels that could not be preset with automatic
programming because their signal strength was too weak, or
to erase unnecessary channels, follow the steps in ’To preset
only the desired channels” on the next page.
To check preset channels
Press CH +/-.
If the indication “VIDEO 1, VIDEO 2, VIDEO 3, S VIDEO, LD, or
VTR” is displayed on the screen
Press the TV/VIDEO button on the TV or the TV button on the
Remote Commander so that a channel number appears.
18