Sony KV-27XBR65 - Manual (Page 47)

How to Use the Learning Function
1
4BD ngl"
t
o o o o
o o o
o o o a o
OOllDlUO
OOI=ll=l
1
•LEARN
indicator
2,7
1
Set the PIP/VIDEO/CABLE selector and VTR
1/2/3/MDP selector to the appropriate
position.
2
Set the USE/LEARN selector
to LEARN.
g
3
Position this Remote Commander and the
other Remote Commander head to head,
approximately ^ inches (S cm) apart
4 Momentarily press the button of this Remote
Commander on which a function is to be
memorized.
The LEARN indicator lights up.
(Beep).
Now it’s ready for learning.
Note
If you press a button which is not
programmable, the Remote Commander will
beep 8 times repeatedly.
Approx.
2 inches
^ cm)
5
RM-76W
Keep pressing the function button of the
other Remote Commander until the LEARN
indicator goes out A long beep is also heard
which confirms that the learning was
successfully completed.
6 To continue learning other functions, repeat
steps 4 to 5.
For accurate learning
Do not move the Remote Commanders during the learning
process.
7
After learning is finished, set
the USeLEARN selector to USE
C
fB
¿7