Sony KV-27XBR65 - Manual (Page 28)

Enjoying Convenient Features
fihuimg ¿ 1 » eound ________________ _____ ________ __
Press MUTING.
The “MUTING” indication will appear on the screen.
To restore the sound, press MUTING again or VOL +.
channel cflsphqred
Press DISPLAY.
To make the channel display disappear, press DISPLAY
again.
^ilig^SLSP_^
Press SLEEP.
The TV will be turned off automatically after about 1
hour. The "SLEEP’ indication will appear on the screen
for a few seconds and the SLEEP indicator on the TV
will remain lit until the TV is turned off.
To cancel the SLEEP timer, press SLEEP again so that
the SLEEP indicator goes out, or turn off the TV.
For KV'27XBR50/32XBRS0, the green ’’SLEEP ON”
indication will appear on the screen for three seconds
when the SLEEP button is pressed. And the red “SLEEP”
indication will appear one minute before the TV is turned
off automaticaliy. When the SLEEP button is pressed
again, the “SLEEP OFF’ indication will appear three
seconds before the SLEEP timer is canceled.
Only for KV-27XBR50/32XBR50
most jMd pldure
Press ASC.
The “ASC ON” indication with the rotating mark (O) will
appear on the left bottom of the screen for a few
seconds to let you know the ASC is activated. The ASC
continualiy adjusts sharpness, brightness, color and
picture settings for optimum picture quality. The ASC
automatically reduces noise when the signal is weak (in
weak electric field).
To cancel the ASC, press ASC again. The “ASC OFF’
indication will appear on the screen.
rTCf iMre iiBiuni sound tsptoductioti
Press SRS (sound retrieval system).
The ’’(•) SRS” indication will appear on the screen.
To cancel SRS, press SRS again.
For KV>27XBRS0f32XBR50, each time SRS is pressed,
SRS (STEREO), SRS (MONO) or SRS OFF is selected in
sequence. On the SRS (MONO) mode the natural sound
of a monaural source can be also enhanced.
ptwoMnnB a MUDcranMi iv snMna pravani
Each time MTS is pressed, MAIN. SAP (Second Audio
Program), or MONO Is selected in sequence.
To listen to stereo sound, select the MAIN mode so that
the on-screen MAIN indication appears. The STEREO
indicator on the TV lights up whenever a stereo
broadcast is received.
There may be cases of stereo broadcasts where
excessive noise will be heard due to a weak incoming
signal. You may be able to eliminate this noise by
selecting the MONO mode.
ggaWBBpnWg cpncny INVW8M WO GlMl1l1il9
Press JUMP.
Each time JUMP is pressed, the channel which appeared
on the screen directly before is recalled. This button
enables you to keep track of two programs alternately.
JUMP also switches programs in the ANT/AUX mode.
28