Sony DCR-PC1 - Manual (Page 26)

Changing the mode settings
S AUDIO MODE <#12BIT/16BIT> »-
• Normally select 12BIT to record two stereo sound.
• Select 16BIT to record the one stereo sound with high quality.
If you select 16BIT, you cannot add an audio sound.
O CLOCK SET
Select this item to reset the date or time.
See page 74 for details.'
DEMO MODE <«STBY/ON or OFF>
• Select STBY/ON to glance over the function of camcorder.
• Select OFF not to display demonstration.
Notes on DEMO MODE
• DEMO MODE is set to STBY (Standby) /ON at the factory and the demonstration
starts about 10 minutes after you set die POWER switch to CAMERA without
inserting a cassette.
• You cannot select DEMO MODE when a cassette is inserted in the camcorder.
• If you insert a cassette during the demonstration, the demonstration stops. You can
start recording as usual. DEMO MODE automatically returns to STBY/ON.
To look at the demonstration at once
Eject the cassette, if inserted. Select STBY/ON of DEMO MODE and erase the menu
display. The demonstration will begin.
When you turn off the camcorder once, DEMO MODE automatically returns to
STBY/ON.
^ WORLD TIME
Select this item to set the clock for a local time by a time difference.
REC LAMP <«ON/OFF>
• Normally select ON.
• Select OFF when you do not want the camera recording/battery lamp at the front of
the unit to light up.
vyhen reco/ding a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the
camcorder may reflect on the subject if it is close. In this case, we recommend you set
REC LAMP to OFF.