When fading in [a, When fading out [b, When you use the bounce funrtion – Sony DCR-PC1 User Manual
Page 33: Note on the bounce function, Using the fader function
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the FADER function
.
if» -
» !
■’■l^-'V* ••,.■
■•W* . 'S
When fading in [a]
(1)
While the camcorder is in Standby mode, press FADER until the desired indicator
flashes.
(2)
Press START /STOP to start recording. The fade indicator stops flashing.
When fading out [b]
(1)
During recording, press FADER until the desired indicator flashes.
(2)
Press START/STOP to stop recording. The fade indicator stops flashing, and then
recording stops.
The fading mode selected last is indicated first of all.
.1 M 1/,
FADER-
- ^.FAOEff^
When you use the bounce funrtion
Set D ZOOM to OFF in the menu system.
Note on the bounce function
When you use the following functions, "BOUNCE" indicator does not appear.
- Wide mode
- Picture effect mode
- PROGRAM AE mode