To cancel the fader function, Notes on the fader function, Using the fader function – Sony DCR-PC1 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the FADER function
To cancel the fader function
Before pressing START/STOP, press FADER until the indicator disappears.
Notes on the fader function
• While using the bounce function, you cannot use the following functions.
- Exposure
- Focus
- Zoom
• You cannot use the fader function in the following situatioirs.
- The START/STOP MODE switch is set to
±
ANTI GROUND SHOOTING or
5SEC
- The menu is displayed in the viewfinder or on the LCD screen.
• You cannot use the following functions while using the fader function. Also, while
using the following functions you carvnot use the fader function.
- Functions using the DIGITAL EFFECT button
- Low Lux mode of'PROGRAM AE (overlap function only)
- Photo recording
• If you do not record anything before operating the overlap function, the camcorder
memorizes the image on the tape. As the image is being memorized, the OVERLAP
indicator flashes quickly. Depending on the tape condition, the picture may not be
recorded clearly.