Items for both camera and vtr modes, Lcd color, 1 vf bright – Sony DCR-PC1 User Manual
Page 28: Bq titleerase, Bd tape title, Bui erase all <return/ok, Is rec mode <«sp/lp, Sezq remain <«auto/on, Changing the mode settings
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the mode settings
• is set at factory.
Items for both CAMERA and VTR modes
ffl P EFFECT»*
Select this item to enjoy the picture effect. See page 36 for details.
@ LCD COLOR
Select this item and change the level of the indicator by turning control dial up or down
to adjust the color intensity of the picture.
@1 VF BRIGHT
Close the LCD panel and pull out the viewfinder.
Select this item to adjust the brightness of the viewfinder. The viewfinder becomes
brighter when you turn the control dial up, and darker when you turn it down.
BQ TITLEERASE
Erase the title you have superimposed.
BD TAPE TITLE
Select this item to label the cassette tape. See page 55 for details.
BUI ERASE ALL <RETURN/OK>
• Select RETURN to cancel the erase operation.
• Select OK to erase all data on the cassette memory.
IS REC MODE <«SP/LP>
• Select SP when recording in SP (standard play) mode.
• Select LP when recording in LP (long play) mode.
SEZQ REMAIN <«AUTO/ON>
• Select AUTO when you want to display the remaining tape indicator
• for about 8 seconds after the camcorder is turned on and calculates the remainder
of the tape.
• for about 8 seconds after a cassette is inserted and the camcorder calculates the
remainder of the tape.
• for about 8 seconds after ► is pressed in VTR mode.
• for about 8 seconds after DISPLAY is pressed to display the screen indicator.
• for the period of tape rewinding, forwarding or picture search in VTR mode.
• Select ON to always display the remaining tape indicator.