Sony CCD-TR61 - Manual (Page 33)

Editing onto Another Tape
You can create your own video program by editing with any other H 8 rnm, MB Hi8, |B Betamax.
imS VHS, MViri' S-VHS, iwisiil VHSC or MlilKItl S-VHSC VCR that has audio/video inputs.
Before Editing
Connect the camcorder to the VCR using the supplied A/V connecting cable, (p. 22)
Set the input selector on the VCR to LINE, if available. Set EDIT on the camcorder in the direction of the
arrow. Set the POWER switch to PLAYER.
Starting Editing
(1) Insert a blank tape (or a tape you want to record over) into the VCR. .And insert your recorded tape
into the camcorder. (2) Play back the tape on the camcorder until you locate the point where you want to
start editing, then set the camcorder in the playback pause mode. (3) On the VCR, locate the recording
start point and set the VCR in the recording pause mode. (4) Press ||on the camcorder and VCR
simultaneously to start editing.
To Edit More Scenes
Repeat steps 2 to 4.
To Stop Editing Momentariiy
Press II on the VCR.
To Stop Editing
Press □ on both the camcorder and the VCR.
Use of the EDITSEARCH button
You can playback the tape in normal/reverse direction by keep pressing EDITSEARCH during Standby or
playback pause mode. You can also playback still pictures successively at specific intervals by pressing
EDITSEARCH intermittently.
Note on the EDIT switch
When you set EDIT in the direction of the arrow, you can keep picture deteriorations resulting from
editing to a minimum. However, when you edit or copy to another VCR, avoid using the edited tape for
multiple generations of editing. After editing, be sure to set this switch in the opposite direction of the
arrow.
Note on the DATA SCREEN/DISPLAY function
If you have displayed the viewfinder screen Indicators on the TV, erase the indicators by pressing
DATA SCREEN/DISPLAY on the Remote Commander so that they will not be superimposed on the edited
taoe.
c
C9
<D
I
a
O
8
(Û
O
3 s
>
3
o