The life of the battery pack, Charging tentperature, Note on charging a brand>new battery – Sony CCD-TR61 User Manual

Page 9: Before recharging a used battery pack, After long storage, Note on the terminals, Be sure to observe the following

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

The Life of the Battery Pack

The battery pack can be fully charged and discharged about SOO times under normal temperatures. If the

battery indicator flashes rapidly just after turning on the camcorder with a fully charged battery pack, the

battery pack should be replaced with a new fully charged one.

Charging Tentperature

You should charge batteries at temperatures from 10*C to 30*C (from SO'F to 86*F). Lower

temperatures require a longer charging time.

Note on Charging

A Brand>new Battery

A brand-new battery pack is not charged. Before using the battery pack, charge it completely.

Before Recharging a Used Battery Pack

e Make sure to use up the battery before recharging.
e If recording is completed before the <Xl indicator appears in the viewfinder, you should remove the

tape, slide the POWER switch to CAMERA, turn up the STANDBY switch, and leave the camcorder until

the battery indicator flashes rapidly.

• When you use the AC-S10 power adaptor, the OC-S10 car battery charger or BC-S10 portable battery

charger, you can use the discharging function.

• Charging the usable battery causes a lowering ol battery capacity. Battery capacity can be recovered

if you fulfy discharge and charge the battery again.

After Long Storage

Recharge the battery pack after a long period of storage. If the battery pack is charged fully but not used

for a long time (about 1 year), it becomes discharged. Charge it again, but in this case the battery life
will be shorter than normal. After several charging and discharging cycles, the battery life will recover

its original capacity.

Note on the Terminals

If the terminals (metal parts on the back) are not clean, the battery duration will be shortened.

When the terminals are not clean or when the battery pack has not been used for a long time, repeat

installing and removing the battery pack. This improves the contact condition. Also, wipe the and -

terminals with a soft cloth or paper.

Be Sure to Observe the Following

e To prevent an accident caused by a short circuit, dc not allow metal oblects such as a necklace to

touch the battery terminals. Carry the battery pack attaching to the terminal cover, [d]

0

Keep the battery pack away from fire,

a Keep the battery pack dry.
a Do not open nor convert the battery pack.
0 Do not expose the battery pack to any mechanical shock

<o

5

0

Q)

1

•2

[C]

«q

Advertising
This manual is related to the following products: