Sony SLV-750HF - Manual (Page 16)

Preparing the Remote Commander
Operating the VCR with the Remote Commander
SettheiTVi/iVTR remote control selector at the top of the
Remote Commander to “VTR.”
If you are using a Sony TV
You can use the Remote Commander of this VCR to operate
the TV. When doing this, slide the ÎTV /
l VTR' remote control
selector to TV.” Buttons on the Remote Commander with a
dot (•) on or beside them can be used to operate your TV. To
operate the VCR. return the TVi/iVTR remote control
selector to “VTR.”
How to Use the Remote Commander
When you operate the VCR using the Remote Commander,
point it at the remote sensor located on the VCR. For the
location of the remote sensor, see “Identifying the Parts and
Controls” on page 57.
When using the Remote Commander to change channels on
a cable box, with the VCR's Cable box control feature turned
on, point the Remote Commander at the VCR. not the cable
box. For best results, separate the VCR and cable box.
Notes on the handling of batteries
• With normal use, the batteries should last for
approximately six months.
• If you do not use the Remote Commander for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage.
• Do not use a new battery together with an old one.
• Do not use different types of batteries.
16 Preparation