Sony SLV-750HF User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The Display
To delete or call up the Display on the TV screen, press
DISPLAY on the Remote Commander.
Approximate amourrt
of tape left
Beginning
of the tape
3
Indexing Tape Contents
Before recording or playback, press COUNTER RESET on
the Remote Commander to reset the counter to zero. By
noting the setting, you can find that point later by referring to
the counter. Use the label on the cassette to list the
programs and their counter readings.
2
ei
e>
End of the tape
110/15 FRi iiiOPAMi— Date and time
1^ 1^ 10.00.221—
Tape operation mode Tape speed
To turn off the Display, press DISPLAY.
I STtREO I—
Audio output
-r- Linear time counter
â ^ o
oi-
NOTES:
• The remaining tape length displayed is approximate.
Therefore, use it only as an approximate reference.
• When you insert a cassette with a short tape length
such as T-20, T-30 or a non-standard commercially
available cassette, this indicator may not function
correctly.
• The on-screen Display cannot be displayed on the
screen during still mode, or slow motion playback.
• Audio output, tape operation mode, and tape speed
are displayed when you make changes to them.
They are displayed even when the Display is turned off.
COUNTER
RESET
DISPLAY
NOTES ON COUNTER READING:
• After a cassette is ejected, the counter reading is
retained. When a cassette is reinserted the counter
returns to “OHOOMOOS."
• The counter will not advance on portions of the tape
on which no recording has been made.
Basic Operations
129