General setup information – Sony SLV-750HF User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
General Setup Information
Attaching the External Antenna Connector
(supplied)
Attaching the EAC66 UA/ Band Separator / Mixer
(not supplied)
VHFAiHF IN
300-ohm twin
lead cable
Screws
1
Loosen the screws on the antenna connector.
2
Fit the 300-ohm twin lead cable on the UHF antenna
under the screws on the antenna connector.
3
Retighten the screws.
1
Loosen the screws on the U/V band separator/mixer.
2
Fit the 300-ohm twin lead cable on the UHF antenna
under the screws.
3
Connect the 75-ohm coaxial cable to the U/V band
separator/mixer.
4
Connect the U/V band separator/mixer to the
VHF/UHF IN plug on the VCR.
56
Additional Information