Activating the cabie box controi function, Activating the cable box control function – Sony SLV-750HF User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Activating the Cabie Box Controi Function
Your VCR includes a Cable Box Control feature which allows
the VCR to control channel selection on most cable boxes.
The use of compatible cable box brand is shown on the
following page.
The CABLE BOX CONTROL must be set to “ON.” and the
code number and the output channel must be set to match
your cable box before you can use it. Detail for connecting
your cable box to the VCR to control the cable box with the
Remote Commander, make connections using Hookup 2 on
pages.
When CABLE BOX CONTROL is set to “ON,” the VCR will
control the cable box channel for timer recording. In addition,
you can use the VCR's Remote Commander to change
channels on the cable box whenever the cable box and the
VCR are turned on.
Note on setting the cable box and Cable Mouse
Make sure that the Cable Mouse is positioned near to and
above the sensor on the cable box so that the signal from
the Cable Mouse is received correctly.
The cable box should not be too close to the VCR.
22
Preparation