Canon EOS 650 - Manual (Page 12)

Display Panel Illumination (EOS 620 Only)
2) Compose the picture and while continuing to
hold down the shutter button gently press the
shutter button completely to take the picture.
• The camera automatically advances the
film to the next frame.
Set the main switch to “L”
camera. to turn off the
18
This camera is equipped with advanced
“evaluative metering” so it automatically
recognizes lighting conditions, subject pat­
tern, and even subject size in the picture
area. Even when there is a difference in
brightness between the main subject and
the background (e.g. backlit photography),
correct exposure can be obtained without
exposure compensation.
m
Press the display panel illumination button to il-
liminate the display panel for approximately
eight seconds.
• To turn off the illumination within eight
seconds press the display panel illumination
button again.
^5. Automatic Film Rewind
The film automatically rewinds at the end of the roll.
■
■
□« 5 e Q
1) During rewind the film transport bars move in
sequence from right to left to indicate the func­
tion In progress while the frame counter
counts in descending order.
2) Film rewind stops automatically when the film
has been completely rewound. Open the back
cover when the film-load check mark((§L)
blinks.
19