Multiple exposures (eos 620 only) – Canon EOS 650 User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

8. Multiple Exposures (EOS 620 Only)

The EOS 620’s provision for multiple ex­

posures allows you to take two or more ex­
posures on the same frame for a creative ef­

fect. Preset multiple exposures up to nine
frames with the single operation of the elec­
tronic input dial are possible.

1) Press both the shooting mode selector and

the

exposure

compensation

button

simultaneously. The “ME” mark indicating
multiple exposure status will then appear in

the display panel and the frame counter will
become “1”.

2) While pressing both turn the electronic In­

put dial to the desired number of ex­

posures. For example, set “3” on the frame
counter if you want to make three ex­
posures on the same frame.

(S

52

While shooting, the “ME” mark will blink

to indicate the camera is In the multiple

exposure status.

After the preset number of exposures

have

been

completed,

the

film

automatically advances to the next

frame.

[Clearing Preset Exposures]

1. Before shooting

Follow steps 1) and 2) on p. 52 and turn the

electronic Input dial to return the frame
counter to “1”.

2. While shooting

The operating procedures are basically the

same as mentioned above, but turn the
electronic input dial until the frame counter
is blank.

[Exposure Compensation]
It Is necessary to correct the exposure depen­

ding on the situation because the same frame

Is exposed several times. Use the exposure

compensation function referring to pp.46—47.

Number of

exposures

Exposure Compensation

Setting

Double

-1.0

Triple

-1.5

Quadruple

-2.0

Notes
1. The preceding table is a general guideline.

The actual amount of exposure com­

pensation varies according to the situation.
Your technique will benefit greatly from
practice.

2. It is not advisable to make multiple ex­

posures on the first or last several frames
due to possible film curl which may
adversely affect image registration.

3. Generally, the first exposure of a series

should be a relatively dark subject so that
the image in the next exposure will show up
clearly.

4. When using a negative film, please Inform

the developer that you have taken multiple
exposures with the negative film, or your
picture taken in multiple exposure may not
be printed.

53

Advertising