Canon EOS 650 - Manual (Page 44)

Specifications
Type:
35mm autofocus, single-lens reflex camera with
electronically-controlled automatic exposure,
focal plane shutter, and built-in motor drive.
Format: 24x36mm
Usable Lenses:
Canon EF lenses (full aperture metering only)
Standard Lens: EF 50 mm f/1.8
Lens Mount:
Canon EF Mount (electronic signal transfer
system)
Viewfinder:
Fixed eye-level pentaprism. Gives 94% vertical
and horizontal coverage of actual picture area,
and 0.8X magnification at Infinity with a standard
50mm lens.
Dioptric Adjustment:
Built-In eyepiece is adjusted to standard -1
diopter, (eyepoint: 19.3mm)
Focusing Screen:
Overall new laser-matte/AF frame. Six types of
interchangeable screens are available optionally.
Mirror:
Quick-return half-mirror with shock and noise ab­
sorber.
Viewfinder Information:
Displayed at the bottom of the viewing area.
(1) 7-segment LCD digit and character display
1. Shutter speed-flashes at 2Hz to give out-
of-metering range warning.
2. Aperture value—flashes at 2Hz to give out-
of-metering range warning.
3. Metered manual exposure level—OP, oo,
CL
4. Depth of field AE (EOS 650 only)—dEP 1,
dEP2
(2) LCD mask character display
1. X -AE lock indicator in partial metering
mode.
2. M-Manual exposure indicator
3.
^ -flash charge completion indicator
4. +/—exposure compensation indicator
5. • -AF in-focus indicator (flashes at 8Hz
when AF is not possible.)
Light Metering System:
TTL full aperture metering using SPC. Two selec­
table metering patterns: evaluative metering and
partial metering (approx. 6.5% of the picture
area). Stopped-down metering Is not possible.
82
Exposure Modes:
1. Shutter-Priority AE
2. Aperture-Priority AE
3. Intelligent Program AE
4. Program Shift Function (EOS 620 only)
5. Depth of Field AE (EOS 650 only)
6. Manual
7. Flash AE (A-TTL program flash AE and TTL
program flash AE with specified Canon
Speedlites)
Camera-shake Warning:
Operates for program AE, aperture-priority AE,
and the EOS 650’s depth of field AE modes.
When automatically set shutter speed falls 0 to
0.5 steps below 1/focal length of the lens in use,
the electronic beeper sounds. Beeper can also
be turned on and off.
Metering Coupiing Range:
EV 1-20 (EV -1 to 20 in normal temperature)
with 50mm f/1.4 at ISO 100 or equivalent.
Fiim Speed:
ISO 25-5000 Is automatically set by 1/3 step ac­
cording to DX code standard. ISO 6-6400 can
also be set manually.
Exposure Compensation:
±5 steps by 1/2-step increment
Auto Exposure Bracketing (EOS 620 Oniy):
db5 steps in 1/2-step increments. Three con­
tinuous exposures are taken in sequence of
underexposure, correct exposure according to
camera’s meter and overexposure.
Muitipie Exposures (EOS 620 Oniy):
Presetting up to nine exposures is possible.
Automatically cleared upon completion.
AF Controi System:
TTL-SIR (TTL secondary Imaged registration)
phase-detection type using BASIS(base-stored Im­
age sensor). AF operation starts when the shutter
button is pressed halfway. AF in-focus Indicator
lights upon ranging completion. Audible indicator
(electronic beeper) can be turned on and off.
Three selectable modes:
1. ONE SHOT: AF operation ends and focus Is
locked once ranging is completed. Shutter
does not release until ranging is completed.
2. SERVO: Focus continuously adjusts to follow
the subject movement. Shutter can be releas­
ed at any time regardless of ranging comple­
tion.
3. Manual: By rotating the manual focusing ring
after focus mode switch is set to “M”.
AF Working Range: EV 1 -18 at ISO 100
AF Auxiliary Light:
The ultra-bright red LED (peak sensitivity: 700
nm) is automatically projected with specified
Canon Speedlites.
83