Canon EOS 650 - Manual (Page 24)

(5) Manual Override
iPURPOSE]
This creative mode allows you to control exposure
by setting both the shutter speed and aperture.
[SETTING]
1) While pressing the shooting mode selector,
turn the electronic input dial until “M” appears
in the display panel.
2) Remove your finger from the shooting mode
selector.
• At this point, the initial setting is always
1/125 sec. at f/5.6.
42
3) Turn the electronic Input dial to set the desired
shutter speed.
4) Press the manual aperture set button.
• At this point, “ OP ”, “ 00 ”, or “ CL ” lights
up instead oithe shutter speed. (The aper­
ture value remains unchanged.) The mean­
ing of each display follows:
r M
OP *6
ONE SHOT
^
'
—
'U
M
oo
ONE SHOT
M
CL
ONE SHOT
fs1
» sH
OP : underexposure
(OPen the aperture)
00 : correct exposure
CL ; overexposure
(CLose the aperture.)
5) While pressing the manual aperture set but­
ton, turn the electronic input dial until “ oo ”
displays. The corresponding aperture value
displays.
6) Remove your finger from the manual aperture
set button.
7) Determine the exposure referring to the shut­
ter speed/aperture combination. You must rely
on your own experience for setting the ex­
posure.
• Set a slower shutter speed if “ OP ” re­
mains lit when the electronic input dial is
turned to the lens maximum aperture.
• Set a faster shutter speed if “ CL ” remains
lit when the electronic input dial is turned to
the lens minimum aperture.
• The camera-shake warning does not sound
in the manual mode.
43