Inserting new lithium battery – Canon E 250 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
i-j
•
¿0
Inserting New Lithium Battery
The CR2025 type lithium battery provides your
camera with enough power to store digital title,
date and time settings, even when the ceimera
is turned off.
One lithium battery will last approximately one
year. (Life span of lithium battery varies slightly
according to ambient conditions.) When lithium
battery is not in place or is nearly exhausted,
“DATE” flashes in viewfinder, indicating that the
lithium battery needs to be replaced.
Be sure to connect a power source to the
camera before changing the lithium battery,
otherwise, digital title, date and time settings
will be cleared from camera’s memory and will
have to be reset.
Inserting Procedure ИДЯ
1. Press GRIP UNLOCK button and
rotate the grip downward.
2. Hold the camera with the battery
pack facing down, then draw out
the lithium battery holder.
• If the camera is held with the battery pack
facing up, the lithium battery will drop out
when the lithium battery holder is removed.
3. Insert a new lithium battery into
the lithium battery holder with +
side facing up.
4. Snap the lithium battery holder
into the compartment.
Warning
The battery used in this device may present a fire or
chemical bum hazard if mistreated. Do not recharge,
disassemble, heat above 100“C or incinerate.
Replace battery with Panasonic CR2025 or Duraceli
DL2025B. Use of another battery may present a risk
of fire or explosion. The used battery sfKXJid be
handed back to the supplier.
[Caution------------------------------- --------------------------------
• Make sure + side is facing up in lithium battery
compartment.
• Keep battery out of children’s reach. If swallowed,
contact physician immediately.
• To ensure proper contact, wipe battery with dean,
dry doth before use.
• Do not pick |ip battery using tweezers or other
metal tools which may cause short drcuiting.
• Do not disassemble, heat or imrrerse in water, to
avoid risk of explosion.