Canon E 250 - Manual (Page 75)

^ ■
m
v;
'V.'
The RU-100 RF Unit is required in order to view
recorded video cassette on a TV which does not
have audioA/ideo input temiinals. There are two
models of RU-100, one for Europe and one for
Australia. The connection eind setting procedures
for the two models differ.
On a TV without audio/video input terminals E250
play back in monaural.
Using TV without AudioA^ideo Input
Terminals (European Model)
RU-100 liQ
Q Connection Plug
Q G/l Selector
Q Video Channel Selector
Q FROM ANT. Terminal
0 TO TV Terminal
Coaxial Cable with DIN-connectors
Q male
Q female
Connection Procedure
1. Connect RF Unit to camera.
2. Attach aerial cable to FROM ANT.
terminal, and connect female
connector to TO TV terminal of RF
unit.
• Rease note the difference between ‘male’
and lemale' type DIN-connectors on coaxial
cable.
3. Connect male connector to aerial
input of TV.
To View a Regular TV Programme
The RU-100 RF Unit has an automatic signal
selector which selects the signal from the video
camera whenever the camera is connected to the
RF unit and the power is turned on. To view a
regular TV programme, disconnect the camera
from the RF unit, or turn the camera off.
>
-<
03
>
o
7^
67