White balance lock procedure, Press awb/lock/gain up button, Make your recording – Canon E 250 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
2 , 4
EHD/
lock
GAIN UP
C
3)
m
o
O
3]
g
z
o
White Balance Lock Procedure
1. Point camera lens at a white ol^ect (such as a
sheet of paper) for 10 seconds, so it completely
fills viewfinder.
• Set zooming lever to telephoto end.
• Be sure sufficient lighting is available.
• There is no need for focusing.
2. Press AWB/LOCK/GAIN UP button.
• “WB LOCK” appears in viewfinder, texati
3. Make your recording.
4. Press AWB/LOCK/GAIN UP button again to
reset auto white balance.
• “WB LOCK” disappears from viewfinder.
Note:
• Presang the AWB/LOCK/GAIN UP txjtton for iTMre than 3 seconds engages gain-up function.
43
Advertising